Product Description
35mm 8v permanent magnet linear motor stepping for robot,smart lock and injector
Product Application: Printer, fax, copier, camera, monitor head, robot,smart lock and injector etc.
This product is mainly used in printers, fax machines, copiers, camera sets, monitoring heads, etc. At the same time, other fields that require precise control can be realized, and the torque can be increased by configuring the corresponding reduction gear box, and the torque can be converted into a linear motion by the transformation of the linear motion. Since the open loop control is realized, low-cost position control is realized. Widely used in gas valves, water purifier valves, instruments and other fields of automatic control precision control. At the same time, the external wiring part can use four (or six) binding posts (light pins) or connecting wires according to customer requirements, or FPC FFC, etc. The output part can use gears, pulleys, V-grooves and other various methods. The shape of the mounting plate and the angle of the outlet can be adjusted according to customer needs! Since the voltage resistance of the motor and the driving method are different, the final performance of this type of motor is not the same! Our team has more than 10 years of stepper motor design, development and production experience, so we can achieve product development and auxiliary design according to the special needs of customers! Customer needs are our efforts, please feel free to contact us! This product can be divided into 4 sub-categories according to the thickness and step angle. Refer to the following instructions respectively. At the same time, these four types of motors can be bipolar (four power wiring) and unipolar (six or five power wiring). Driven by means of driving, our company can also provide driver board for customers.
1. The step angle is 15 degrees and the motor thickness is 22mm.
2. The step angle is 7.5 degrees and the motor thickness is 12.5mm.
3. The step angle is 7.5 degrees and the motor thickness is 15.5mm.
4. The step angle is 7.5 degrees and the motor thickness is 22mm.
Model | Rated voltage (V) | Resistance (Ω) | No. of phase | Step angle | Current (A) | Detent torque (N.m) | Pull in rate (PPS) | Holding torque (N.m) | Length (mm) |
BBM-35 | 8 | 16±10% | 4 | 7.5±7% | 0.5 | 0.01 | 400 | 0.04 | 12.5 - 22 |
We use reliable packaging and logistics, for customer to receive the products in good condition. Also, we could customize according to your requirements.
content is empty!